Baxi Bermuda SL3 Installation and Servicing Instructions

Baxi Bermuda SL3 Installation and Servicing Instructions

 

Natural Gas
Baxi Bermuda SL3

G.C.No 37 077 60

For use with the following boilers:

Bermuda 45/4 M G.C.No 44 077 71

Bermuda 45/4 E G.C.No 44 077 73

Bermuda 57/4 M G.C.No 44 077 72

Bermuda 57/4 E G.C.No 44 077 74

Renewal

Baxi Bermuda SL3 Renewal G.C.No 37 075 02A
For use with the following boilers:

B.S. Codes of Practice

page2image8108096

Bermuda 401 G.C.No 44 077 49

Bermuda 552 G.C.No 44 077 50

Bermuda 45/3 M G.C.No 44 077 61

Bermuda 45/3 E G.C.No 44 077 60

Bermuda 57/3 M G.C.No 44 077 63

Bermuda 57/3 E G.C.No 44 077 62

Bermuda 45/4 M G.C.No 44 077 71

Bermuda 45/4 E G.C.No 44 077 73

Bermuda 57/4 M G.C.No 44 077 72

Bermuda 57/4 E G.C.No 44 077 74

This unit is the gas fire section of the Bermuda SL3 central heating boiler and gas fire. The heat input is 5.70kW (19,450 Btu/h) and the fire is available for use with Gas Type G20 (Natural Gas) at 20mbar or Gas Type G31 (Propane). The fire is controlled by a knob positioned on the right hand side of the case. Ignition is by piezo spark to the pilot (Fig 13). For details of Propane appliances see back page.

The control knob has six positions giving a choice of four output rates.

STANDARD B.S. 6891 B.S. 5546

B.S. 5871

B.S. 5440: Part 1 B.S. 5440: Part 2 B.S. 6798

B.S. 5449: Part 1

INTRODUCTION

SCOPE
Gas Installation.
Installation of hot water supplies for domestic purposes.
Installation of gas fires, convectors and fire/back boilers.
Flues
Air Supply
Installation of gas fired hot water boilers.
Forced circulation hot water systems.

page2image10096496

POSITION POSITION POSITION 1 POSITION 2 POSITION 3 POSITION 4

- THE FIRE IS OFF.
- IGNITION/PILOT.
- THE FIRE IS ON LOW.
- THE FIRE IS ON MEDIUM.
- THE FIRE IS ON MEDIUM/HIGH. - THE FIRE IS ON HIGH.

page2image10099824

Propane Gas
Baxi Bermuda SL3 Propane

G.C.No 37 077 70

For use with the following boiler: Bermuda 553 Propane
G.C.No 44 077 75

File Info

File Size - 504 KB
Created Date - January 11, 2020
Last Updated - January 11, 2020

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Disclaimer: Information on this website is provided for informational purpose therefore we cannot accept liability for subsequent problems. All repair tasks should be carried out by qualified trades people. We may also receive commission payments when you are taken to external websites and complete purchases from third party sellers, once you leave our site, we cannot be held liable for your purchases.