Static overlay

Energy bills have been increasing. There are still ways to reduce this.

Rashik Home

 

Loft Floor

  • Wundaboards 20mm / 16mm MLCP 100m Max Length
  • 150mm centers
  • UFH pipework to come from 1st floor manifold
  • Heatmiser Controls NeoStat X1
  • Pump and Blend set for different finishes.
  • Cat6 to each room going from manifold, for possible future room sensing and automation

First Floor

  • Emmetti Manifold,
  • Wundaboards 20mm / 16mm MLCP 100m Max Length
  • 150mm centers
  • Heatmiser Controls NeoStat
  • Heatmiser Junction Box
  • Pump/Mixer set for different finishes. ADD SPACE for LATER
  • Manifold to boiler 5 core flex
  • Cat6 to each room going from manifold, for possible future room sensing and automation

Ground Floor

  • Emmetti Manifold,
  • Wundaboards 20mm / 16mm MLCP 100m Max Length 150mm centers
  • Heatmiser Neo Thermostat with Zone valve.
  • If multizone add Heat miser junction box, stats and actuators.
  • Pump/Mixer set for different finishes. ADD SPACE for LATER
  • Manifold to boiler 5 core flex
  • Cat6 to each room going from manifold, for possible future room sensing and automation

Boiler

  • Viessmann 100-W 19 KW 4 Pipe
  • Weather Compensation setup. Outdoor sensor and wire to go to NW / N wall.
  • De-aerator, Dirt Filter.

Cylinder

  • Viessmann 250L High Recovery coil / Heat Pump Coil 26KW or Twin Coil
  • Joule High Gain Indirect. 210/ 250L .  Short Stand Tall to compartment size.

Important:

Make note of pipework circuit length used to each manifold port.

Misc:

 

  • Wundaboards 16mm / 12mm MLCP. 60m Max length

Disclaimer: Information on this website is provided for informational purpose therefore we cannot accept liability for subsequent problems. All repair tasks should be carried out by qualified trades people. We may also receive commission payments when you are taken to external websites and complete purchases from third party sellers, once you leave our site, we cannot be held liable for your purchases.